Archive for March, 2010

nowexam :: HP0-841 study, the latest HP0-841 courses Designing and Implementing HP SAN Solutions

Wednesday, March 17th, 2010

Share HP0-841 pdf Braindumps the latest HP courses and online HP_APC training resources,for pass HP0-841 Exam topics provide study guide and informations.when you study HP0-841 pdf dumps of HP publishing,HP0-841 from HP_APC certification and you can easier to pass these certification, get for HP0-841 materials identification.for certify pass1000′s Exam topics can pass HP0-841 cetification,please you visit these demo Designing and Implementing HP SAN Solutions,when you needs for get HP0-841 (Designing and Implementing HP SAN Solutions) identification.pass1000 published HP0-841 by HP exam simulation questions,the exact nature to help the candidates to easily pass the exam, and get everyone’s praise.
1.What are the three types of fabric zoning on B-series switches? (Choose three.)
A.static zoning
B.software zoning
C.hardware zoning
D.mixmode zoning
E.QuickLoop zoning
Correct:B C D¬
2.In a single fabric, when multiple paths exist between a host and its storage, which statement is true?
A.The result could be an unstable fabric.
B.Load sharing is automatically set to static.
C.The FSPF protocol determines best route.
D.The path used is determined by port priority.
Correct:C¬
3.What is the correct statement about zoning in an interoperable fabric?
A.WWPN zoning is the only allowed method.
B.A mixture of domain ID, port number and WWPN zoning is allowed.
C.Domain ID and port number zoning are the only allowed methods.
D.Zoning  is not allowed. The only way  to segment a  fabric  is using  the VSAN  technology of C-Series
switches.
Correct:A¬
4.What  is  the maximum distance per cable segment using 9/125 micron single-mode cable and long wavelength 2 Gb SFPs?
A.1 km
B.5 km
C.10 km
D.35 km
E.100 km
Correct:C¬
5.What is the internal M-series switch latency of a HP Fibre Channel switch?
A.between 1us and 2us maximum
B.3us
C.5us
D.33us
E.650us
Correct:A¬
6.Three LUNs, sda, sdb and sdc, are connected to a Linux server. You shutdown the server and
physically remove sdb. What happens after the server reboots?
A.The LUNs sda and sdc are accessible, LUN sdb is not listed in the device scan.
B.The LUN sda is accessible, LUN sdc is now sdb and accessible using this name.
C.The LUNs sda and sdc are accessible, LUN sdb is listed as offline in the device scan.
D.The LUNs sda and sdc are accessible, LUN sdb is renamed into sdvb simulating a virtual device.
Correct:B

nowexam :: HP0-914 study, the latest HP0-914 courses HP-UX High Availability

Tuesday, March 16th, 2010

Share HP0-914 pdf Braindumps the latest HP courses and online HP_CSA training resources,for pass HP0-914 Exam topics provide study guide and informations.when you study HP0-914 pdf dumps of HP publishing,HP0-914 from HP_CSA certification and you can easier to pass these certification, get for HP0-914 materials identification.for certify pass1000′s Exam topics can pass HP0-914 cetification,please you visit these demo HP-UX High Availability,when you needs for get HP0-914 (HP-UX High Availability) identification.pass1000 published HP0-914 by HP exam simulation questions,the exact nature to help the candidates to easily pass the exam, and get everyone’s praise.
1.Which statements are true regarding High Availability (HA)? (Select three.)
A.HA can be implemented just by purchasing expensive hardware.
B.HA is a technical high-performance environment that does not consider business needs.
C.Downtime is any amount of time when the application is unavailable (planned or unplanned).
D.HA systems provide a disaster recovery solution to recover from the loss of an entire data center. E.HA is a combination of environmental, process, software and computing hardware enhancements that are made to maximize the time that the application and system are available.
F.Highly available  systems  typically contain data  redundancy  through mirroring or RAID,  some  kind of backup system hardware, a UPS for power outage protection, and multiple LANs.
Correct:C E F¬
2.In the context of high availability, what is the effect of split-brain syndrome?
A.different partitions accessing the same disks without knowledge of each other
B.two sub-clusters initiated from a single cluster without knowledge of each other
C.different applications accessing the same disk without knowledge of each other
D.two clusters initiating an application that accesses the same disk simultaneously
Correct:B¬
3.Click the Task button. Using drag and drop, match each single point of failure with the solution to prevent it.
Correct:
Green choice2—->Yellow Choice4
Green choice3—->Yellow Choice1
Green choice5—->Yellow Choice3
Green choice6—->Yellow Choice2
4.What is the main feature of OLAR?
A.the ability to replace a cell board on an HP-UX system that supports OLAR
B.the ability to repair a PCI I/O card on an HP-UX system that supports OLAR
C.the ability to online replace a PCI I/O card on an HP-UX system that supports OLAR
D.the ability to online replace an HP-UX system that supports OLAR while  it  is configured in a Serviceguard cluster
Correct:C
5.In the context of high availability, which phrase describes Mean Time Between Failure (MTBF)?
A.the amount of time to restart a failed service
B.the amount of time to restart a service after a failure
C.the amount of time a system can provide service without failure
D.the amount of time between stopping and starting a service after a failure
Correct:C¬
6.When a Serviceguard package fails over in a highly available vPar environment, WLM integrates with Serviceguard and disaster tolerant solutions by doing which process?
A.WLM can move processors from one virtual partition to another.
B.cmcld can move processors from one virtual partition to another.
C.WLM creates a new vPar to assume the load of the failed partition.
D.cmcld creates a new vPar to assume the load of the failed partition.
E.WLM can move a Serviceguard package from one virtual partition to another.
Correct:A¬
7.Which statements are correct regarding a Serviceguard cluster with SGeRAC and Oracle RAC? (Select two.)
A.If CFS is used then RAW devices are not allowed.
B.Each Oracle instance must have its own unique database.
C.The shared disk devices can be a SLVM RAW device or a CFS.
D.SGeRAC cannot be configured together with Cluster File System (CFS).
E.You can have more than one Oracle instance accessing the same database at the same time.
Correct:C E¬
8.What are the advantages of RAC cluster? (Select three.)
A.user scalability
B.hardware scalability
C.application scalability
D.larger database size
E.better database security
F.operating system scalability
G.shorter package failover time
Correct:B C F

nowexam :: HP0-096 study, the latest HP0-096 courses HP-UX Advanced System Administration

Tuesday, March 16th, 2010

Share HP0-096 pdf Braindumps the latest HP courses and online HP_CSA training resources,for pass HP0-096 Exam topics provide study guide and informations.when you study HP0-096 pdf dumps of HP publishing,HP0-096 from HP_CSA certification and you can easier to pass these certification, get for HP0-096 materials identification.for certify pass1000′s Exam topics can pass HP0-096 cetification,please you visit these demo HP-UX Advanced System Administration,when you needs for get HP0-096 (HP-UX Advanced System Administration) identification.pass1000 published HP0-096 by HP exam simulation questions,the exact nature to help the candidates to easily pass the exam, and get everyone’s praise.
1.HP PA-RISC processors contain which features? (Select three.)
A.EPIC instruction set
B.division functional units
C.multiple functional units
D.fault tolerant architecture
E.on-chipset associate cache
F.floating point multiply and add units
G.hardware Fibonacci sequence generators
Correct:C E F¬
2.What function does the swapper perform in the HP-UX operating system?
A.deactivates running processes when free memory is too low
B.swaps an entire process from main memory back to disk storage
C.swaps recently referenced pages from main memory back to disk storage
D.swaps  an entire process  from main memory on  to an  intermediate  storage device  and  then  to  disk storage
Correct:A¬
3.Management  purchases  an  Integrity  Superdome  to  replace  two  rp8420  servers.  There  is available CPU capacity and management decides to bring additional applications for execution on the Integrity Superdome. Given this scenario, which statement could be true?
A.Some  of  the  applications  are  Linux-based,  and  Linux  applications  are  not  qualified  to  run  on  the Superdome.
B.The Superdome may be on the verge of an I/O bottleneck, as the Superdome has fewer I/O slots per cell than the rp8420.
C.Some of the applications are Windows-based, that run alongside your HP-UX applications in a different soft partition of the Superdome.
D.Some of the applications are Windows-based, that run alongside your HP-UX applications in a different hard partition of the Superdome.
Correct:D¬
4.Which statements describe the characteristics of the HP PCI I/O implementation? (Select two).
A.It always uses a 5.0 volt slot.
B.Turbo slots provide full PCI bandwidth to a single PCI card.
C.All servers provide a maximum of three PCI slots per CPU.
D.It is able to multiplex several PCI slots onto a single PCI bus.
E.Core I/O card provides basic connectivity of SCSI boot disks, management port, and general purpose network connections.
Correct:B E¬
5.Which objects are valid VxVM objects? (Select four.)
A.plex
B.rootdg
C.cat_vol
D.VM_obj
E.volume
F.subdisk
G.phys_vol
H.mirror_disk
Correct:A B E F¬
6.Neighbor discovery is a component of which protocol?
A.IPv6
B.ARP
C.OSPF
D.DHCP
Correct:A¬
7.Which feature does PPP provide?
A.secure data encryption
B.network address translation
C.bridging between two Ethernet segments
D.transmission of data to remote locations through a serial interface
Correct:D

nowexam :: HP0-094 study, the latest HP0-094 courses HP-UX Netwoeking and Security

Tuesday, March 16th, 2010

Share HP0-094 pdf Braindumps the latest HP courses and online HP_CSA training resources,for pass HP0-094 Exam topics provide study guide and informations.when you study HP0-094 pdf dumps of HP publishing,HP0-094 from HP_CSA certification and you can easier to pass these certification, get for HP0-094 materials identification.for certify pass1000′s Exam topics can pass HP0-094 cetification,please you visit these demo HP-UX Netwoeking and Security,when you needs for get HP0-094 (HP-UX Netwoeking and Security) identification.pass1000 published HP0-094 by HP exam simulation questions,the exact nature to help the candidates to easily pass the exam, and get everyone’s praise.
1.When mounting a file system  from an NFS client, which configuration file  is used to name the local mount point?
A.fstab
B.nfstab
C.exports
D.nfs.conf
Correct:A¬
2.What is the meaning of the following ARP table entry? # arp -a foo (10.0.0.2) at (incomplete)
A.Node foo only supports proxy ARP.
B.The ARP table entry for node foo has expired.
C.An ARP request was sent for node foo, but there was no ARP response.
D.An ARP request was sent for node foo, but only a partial response was received.
Correct:C¬
3.How should you grant NFS filesystem access to individual users as opposed to all users?
A.create a group accessible mount point
B.specify a netgroup in the /etc/exports file
C.add the users to the /etc/exports file using the form host:uid/gid
D.add the users to the /etc/exports file using the form host:username
Correct:B¬
4.Which protocol allows your server¬† to discover¬† the¬† IP address of another server based on¬† the other server’s name?
A.ARP
B.PPP
C.DNS
D.DHCP
E.BOOTP
Correct:C¬
5.What is used for the implementation of Internet name designations as specified in RFC 1034 and RFC 1035?
A.INS
B.BIND
C.SIND
D.DHCP
Correct:B¬
6.A customer reports that pings to node FOO take a long time, then fail with “unknown host”. Of the options given, what is the next logical troubleshooting step?
A.telnet FOO
B.nslookup FOO
C.ps -ade | grep ping
D.ping the IP address of FOO
Correct:B

nowexam :: HP0-091 study, the latest HP0-091 courses HP-UX System Administration

Tuesday, March 16th, 2010

Share HP0-091 pdf Braindumps the latest HP courses and online HP_CSA training resources,for pass HP0-091 Exam topics provide study guide and informations.when you study HP0-091 pdf dumps of HP publishing,HP0-091 from HP_CSA certification and you can easier to pass these certification, get for HP0-091 materials identification.for certify pass1000′s Exam topics can pass HP0-091 cetification,please you visit these demo HP-UX System Administration,when you needs for get HP0-091 (HP-UX System Administration) identification.pass1000 published HP0-091 by HP exam simulation questions,the exact nature to help the candidates to easily pass the exam, and get everyone’s praise.
1.How do you set up a device swap area and ensure it is active at each system startup?
A.Start device swapping using the swapon command on an existing file system mount point.
B.Start device swapping using the swapon command on a logical volume; add an entry to the /etc/fstab file.
C.Start device swapping using the swapon command on a logical volume; add an entry to the /etc/sbtab file.
D.Start device swapping using the swapon command on a logical volume; add an entry to the /etc/vfstab file.
Correct:B¬
2.Which commands can be used to create device files? Select TWO.
A.mkdevice
B.insf
C.fsadm
D.mksf
E.devstart
Correct:B D¬
3.What is the purpose of the lost+found directory?
A.allows fsck to recover orphaned files and directories
B.required on JFS file systems for journaling
C.functions as a trash can for the file system
D.a temporary storage for deleted files
Correct:A¬
4.Which command is used to recreate the /stand/system file?
A.system_prep
B.mkkernal
C.vi system
D.frecover
E.sysgen
Correct:A¬
5.Which level is used by fbackup to complete a full backup?
A.0
B.1
C.9
D.F
E.V
Correct:A¬
6.How does root allow an ordinary user to add/remove printers in SAM?
A.not possible
B.edit sam.allow
C.set the UID bit
D.establish a restricted build
Correct:D

Categories